$8.09
| Bore | 15 mm |
|---|---|
| OD | 24 mm |
| Width | 5 mm |
| Chamfer Min | 0.5 mm |
| Ball Count | 14 |
| Ball Diam (in) | 3/32 |
| Dynamic Load Rating (lbF) | 466 |
| Dynamic Load Rating (kN) | 207 |
| Static Load Rating (lbF) | 219 |
| Static Load Rating (kN) | 97 |
| Ref Mass (lbs) | 0.017 |
| Speed Rating | 33000 |
| Series | 6800 |
| Closure | Open |
The thin line 6800 series bearing was developed for applications where space limitations are of primary consideration. These bearings can accommodate relatively light radial, thrust or combined loads within their basic load ratings. This series is produced open, shielded, sealed or with various combinations of closure.
The thin line 6900 series is similar in function to the 6800 series for use where space limitations are a factor. This series is produced with slightly heavier races and different ball complements enabling the bearing to carry moderately greater loads. This series is produced open, shielded, sealed or with various combination of closures.
Open bearings are not fitted with any closures. This allows them to dissipate heat better than sealed or shielded bearings but can leave them exposed to contamination.